WEBVTT Kind: captions Language: en 00:00:05.640 --> 00:00:11.070 Aloha, my name is Casey Rita with the U.S. geological survey in Honolulu, Hawaii. 00:00:11.070 --> 00:00:15.680 The intent of this primer is to show how to extend ratings and how to apply reading dates 00:00:15.680 --> 00:00:17.190 in GRSAT. 00:00:17.190 --> 00:00:22.980 This will also allow us to demonstrate such tools as cloning ratings and rating overlays. 00:00:22.980 --> 00:00:30.119 First we need to get some data to work with, normally we would retrieve from database but 00:00:30.119 --> 00:00:37.350 for this tutorial we will use from file and use the file that's already been created. 00:00:37.350 --> 00:00:46.350 To view the data click read data, if we had pulled the data from the database all the 00:00:46.350 --> 00:00:51.359 ratings associated with this site would be listed those outside the parameters we chose 00:00:51.359 --> 00:00:58.160 would be listed in gray and those within the parameters would be given in white. 00:00:58.160 --> 00:01:03.379 Lastly you will notice in the overview pane that if we select the rating period, the measurements 00:01:03.379 --> 00:01:09.700 associated with that period will identify themselves. 00:01:09.700 --> 00:01:13.960 We need to extend this rating up to these new measurements, in the real world we would 00:01:13.960 --> 00:01:18.729 have some survey data or other info to help guide us but for this tutorial were just going 00:01:18.729 --> 00:01:20.860 to use the measurements we have. 00:01:20.860 --> 00:01:26.870 As you can see rating 6 is approved and therefore is not able to be edited in any way, so we 00:01:26.870 --> 00:01:31.530 have to make a new rating based on rating 6 so that we can edit it to include these 00:01:31.530 --> 00:01:33.210 new measurements at the higher end. 00:01:33.210 --> 00:01:37.950 There's 2 ways to clone a rating in GRSAT, you can use the set up drop-down menu and 00:01:37.950 --> 00:01:45.060 clone rating or you can use this bad button right here. 00:01:45.060 --> 00:01:49.619 First we need to give the new rating a unique rating number since it's just a straight line 00:01:49.619 --> 00:01:54.409 extension we'll call it 6.1 instead of 7.0. 00:01:54.409 --> 00:01:58.770 The remarks field is a good place to keep important information about this rating, the 00:01:58.770 --> 00:02:03.120 tutorial will keep it fun. 00:02:03.120 --> 00:02:11.470 In our new rating we can choose to include measurement settings, offsets, and selected 00:02:11.470 --> 00:02:14.790 shifts associated with rating 6.0. 00:02:14.790 --> 00:02:21.280 Remember when you're including the shifts you have to select them one by one, to finish 00:02:21.280 --> 00:02:26.879 cloning our rating click okay. 00:02:26.879 --> 00:02:32.840 There we go now we want to overlay the original rating 6.0 so that we can refer to it while 00:02:32.840 --> 00:02:40.330 extending rating 6.1, there's 2 ways to do this with the drop-down menu or the button, 00:02:40.330 --> 00:02:44.450 both get you to the same menu. 00:02:44.450 --> 00:02:48.510 We want to uncheck overlay in the shifted curve that way we just referenced the base 00:02:48.510 --> 00:02:51.260 curve for 6.0. 00:02:51.260 --> 00:02:55.730 You can change the color of the line that gets plotted into anything you want, you can 00:02:55.730 --> 00:03:02.170 choose more colors are one of the standards, let's go with this rocking blue. 00:03:02.170 --> 00:03:06.090 You can also change the line type to pretty much anything you want but let's leave it 00:03:06.090 --> 00:03:12.849 at micro solid now let's overlay the rating and use it shows up right there. 00:03:12.849 --> 00:03:17.459 It goes right over rating 6.0 because right now we haven't changed anything with the rating 00:03:17.459 --> 00:03:18.610 yet. 00:03:18.610 --> 00:03:22.739 Now that we overlay the rating we get 2 more choices right here to choose from, we can 00:03:22.739 --> 00:03:28.260 change the properties of we don't like the colors or if want to make a dotted line or 00:03:28.260 --> 00:03:33.200 we can simply remove it altogether, since we just did it for purpose we don't want to 00:03:33.200 --> 00:03:34.260 remove it. 00:03:34.260 --> 00:03:39.060 Keep in mind the drop-down menu is the same choices as well. 00:03:39.060 --> 00:03:45.120 Now it's time to extend our rating list go to the rating zoom and you'll see these choices 00:03:45.120 --> 00:03:49.580 down here for editing your current rating that you got up now which is 6.1. 00:03:49.580 --> 00:03:55.870 We want to extend so will choose the extend rating line tool. 00:03:55.870 --> 00:04:00.590 You'll notice we have a new rating point now, when you try and move it you'll see it only 00:04:00.590 --> 00:04:04.629 goes in a straight line because it is just that a straight line, a straight line extension 00:04:04.629 --> 00:04:05.629 tool. 00:04:05.629 --> 00:04:11.580 You can confirm this by looking at the slope in the rating table and see that the slope 00:04:11.580 --> 00:04:18.120 will remain constant no matter where you move it or how far you move it, you can also note 00:04:18.120 --> 00:04:23.330 that when you look in the linear zoom window, rating zoom to the straight line extension 00:04:23.330 --> 00:04:30.350 appears to have a slight curve to it but as we see on the slope it does not. 00:04:30.350 --> 00:04:34.480 You can see that while this too is active the rating point is reversed colors from the 00:04:34.480 --> 00:04:39.320 other points as soon as you click off of this tool it becomes rating point just like the 00:04:39.320 --> 00:04:42.710 others and can be edited. 00:04:42.710 --> 00:04:48.750 See it change, if we zoom in you can see a straight line extension is not really what 00:04:48.750 --> 00:04:53.380 we want here, you can also see this in the shift diagram as these top measurements just 00:04:53.380 --> 00:04:55.600 aren't plotting. 00:04:55.600 --> 00:04:59.970 It appears as though the upper end of this rating is breaking into an over bank and the 00:04:59.970 --> 00:05:02.860 control is different in this area of the rating. 00:05:02.860 --> 00:05:10.450 We may need a second offset, so let's go to the offset manager if we select a second offset 00:05:10.450 --> 00:05:15.280 we need to give it a break point where we want the second offset to start kicking in, 00:05:15.280 --> 00:05:20.720 so let's go up to the part of the rating that were working on now we can start to adjust 00:05:20.720 --> 00:05:22.220 the offset. 00:05:22.220 --> 00:05:26.910 As you can see those upper measurements in the shift diagram start moving towards the 00:05:26.910 --> 00:05:41.490 0 shift line, when we get to an offset of about 8 the measurements start to line up 00:05:41.490 --> 00:05:43.490 pretty well so let's view it. 00:05:43.490 --> 00:05:48.650 We'll select offset 2 because that's what were working with an view is so we can see 00:05:48.650 --> 00:05:55.820 it, is zoom in a little bit so now we've extended our rating the measurements at the upper end 00:05:55.820 --> 00:06:01.840 plot we have a second offset were still on rating 6.1 now we need to give it a start 00:06:01.840 --> 00:06:09.850 date that way we can put it into action first let's go to the time series G tab at the bottom 00:06:09.850 --> 00:06:14.030 and you see this comes up. 00:06:14.030 --> 00:06:19.340 Let's check out what kind of tools we have in the time series view tab, we can zoom in, 00:06:19.340 --> 00:06:26.430 we can zoom in, we can zoom in or we can zoom out, we can zoom back in, we can grab this 00:06:26.430 --> 00:06:31.830 hand and we can pan across so that we can see different points on the zoomed in curve 00:06:31.830 --> 00:06:37.270 or we can go back to where we were. 00:06:37.270 --> 00:06:43.520 As you can see the zoom in, zoom out and the pan buttons allow us to manipulate the view 00:06:43.520 --> 00:06:46.740 to help us out to accomplish our goal. 00:06:46.740 --> 00:06:55.480 So let's get to her current period of 2004, 2005 that we're actually working with here. 00:06:55.480 --> 00:07:01.710 There we go that's better also take notice of the bars we have at the bottom here we 00:07:01.710 --> 00:07:07.440 have the rating date bar that shows the rating periods, the shift bar shows the shift periods 00:07:07.440 --> 00:07:11.330 and the aging bar shows the overall data aging. 00:07:11.330 --> 00:07:16.160 The color codes match Hydra red for working, blue for approved, the color of the shift 00:07:16.160 --> 00:07:21.850 bar is different though and that will get covered in the shifts topic you can also use 00:07:21.850 --> 00:07:28.690 his size tool to change the size of the graph to whatever fits your needs best. 00:07:28.690 --> 00:07:33.340 There's also the show high curves tool when you click it, it shows you things you can 00:07:33.340 --> 00:07:37.530 put in and take off if you don't want the shifts there, they're gone, you want the shifts 00:07:37.530 --> 00:07:42.840 back there they are, you want to get rid of the rating is shift period, they gone, you 00:07:42.840 --> 00:07:47.690 want them back where they are. 00:07:47.690 --> 00:07:52.190 Since were not really blaming this to rating on a change in control we can easily just 00:07:52.190 --> 00:07:58.570 started at the beginning of our current working period so to show some GRSATs awesome tools 00:07:58.570 --> 00:08:03.250 let's everyone is started during the event May 2004. 00:08:03.250 --> 00:08:08.520 Let's go to the rating period manager, we're going to select our new rating by double-clicking 00:08:08.520 --> 00:08:15.580 it, we are going to give it a rating period and were going to give it a start date. 00:08:15.580 --> 00:08:23.371 Let's say May 1, 2004, we don't want to give it an end date because he we want to start 00:08:23.371 --> 00:08:29.390 this new rating, we don't want to started and ended at the same time, that's click apply. 00:08:29.390 --> 00:08:35.940 As you can see rating 6 ended one second before this new rating starts therefore rating 6 00:08:35.940 --> 00:08:43.260 is over and rating 6.1 is an action, so let's select rating 6.1, we'll use this tool highlight 00:08:43.260 --> 00:08:49.370 in TS pane, TS, time series, get it, click that button and it will show you where it 00:08:49.370 --> 00:08:51.280 takes effect. 00:08:51.280 --> 00:08:56.380 See it highlight the period that we're using 6.1 the start date it's occurring because 00:08:56.380 --> 00:08:58.720 it hasn't been turned off. 00:08:58.720 --> 00:09:03.330 Now let's see how he is the graph down here to fine-tune our date for the starting date 00:09:03.330 --> 00:09:05.660 and ending date of our other ratings. 00:09:05.660 --> 00:09:11.580 It will come down to time series view and select the adjust date button. 00:09:11.580 --> 00:09:17.770 Now you just grab this rating 6.1 and we can scoot it over but it won't let us go back 00:09:17.770 --> 00:09:24.760 because we can't overlap rating so let's just scoot it forward a little bit, um, that looks 00:09:24.760 --> 00:09:25.760 good. 00:09:25.760 --> 00:09:32.730 Oh now we got a gap in our ratings if we zoom in down here on the rating tab you'll be able 00:09:32.730 --> 00:09:39.140 to see the gap, see that white no rating there, you can also see it up here in yellow, don't 00:09:39.140 --> 00:09:43.570 get scared, don't be afraid, this is a really easy fix. 00:09:43.570 --> 00:09:51.930 We can come back down to our rating bar now select rating 6.0, grab the black line and 00:09:51.930 --> 00:09:58.810 scoot it over no more rating gap, so that works well easy enough but let's see how there's 00:09:58.810 --> 00:10:00.420 other ways to do that. 00:10:00.420 --> 00:10:05.240 Up in the rating period manager there's other tools and different ways to go about exactly 00:10:05.240 --> 00:10:08.070 what we did down here. 00:10:08.070 --> 00:10:13.450 We can use these tools at the bottom, if we get rating 6.1 and we put the start date up 00:10:13.450 --> 00:10:20.700 we get that same gap, we can bring it back, the gap goes away, but let's say we really 00:10:20.700 --> 00:10:22.240 wanted to started here. 00:10:22.240 --> 00:10:29.500 We can go to 6 and do the same thing just adjusts the end time, the gap goes away, gaps 00:10:29.500 --> 00:10:31.650 back, gap goes away. 00:10:31.650 --> 00:10:36.790 If adjusting the rating times down here by 15 minutes isn't good enough for you and we 00:10:36.790 --> 00:10:42.480 can adjust that too, let's keep it to the 15 minute punches though. 00:10:42.480 --> 00:10:46.790 If none of those work for you, you can select your rating click the properties button and 00:10:46.790 --> 00:10:54.650 adjust your dates that way or double-click on the rating, the same menu comes up as the 00:10:54.650 --> 00:11:01.190 properties button. 00:11:01.190 --> 00:11:05.280 It's important to note though you can only change rating dates for ratings that are in 00:11:05.280 --> 00:11:09.610 the working, if they are approved are ready you'll see they are grayed out and there's 00:11:09.610 --> 00:11:14.840 nothing you can do about it. 00:11:14.840 --> 00:11:18.921 Also in the rating period manager if you don't like the rating you can delete it but why 00:11:18.921 --> 00:11:22.780 would we do that, we just worked so hard at getting this thing to plot at the upper end 00:11:22.780 --> 00:11:28.283 and lastly if we haven't found enough ways to fill in rating gaps this grade tool can 00:11:28.283 --> 00:11:29.283 help too but we have to first give ourselves a rating gap. 00:11:29.283 --> 00:11:30.283 There we got our gap, tool comes in, click on the rating above the gap and we can insert. 00:11:30.283 --> 00:11:31.283 But let's say we have 6.1 starting exactly when we want to, just like every other computer 00:11:31.283 --> 00:11:32.283 program make sure you save before you quit, after you save and quit the only thing you 00:11:32.283 --> 00:11:33.283 would have to do is go back into [inaudible] it is at this new rating 6.1 to approve, for 00:11:33.283 --> 00:11:34.283 now GRSAT still can't change the data aging. 00:11:34.283 --> 00:11:35.283 Hopefully everything we went over wasn't too overwhelming and was simple to follow and 00:11:35.283 --> 00:11:35.298 believe me if I can do it you can do it too, Casey Rita, out.